Realacc X210 214mm 3mm/4mm Carbon Fiber Frame RC Drone FPV Racing w/ Matek PDB-XT60 5V & 12V

$29.89 $115.41
Realacc X210 214mm 3mm/4mm Carbon Fiber FPV Racing Frame w/ Matek PDB-XT60 5V & 12V
The Realacc X210 is built for racing and features a light-weight, symmetrical carbon fiber body. A symmetrical X, light weight, super stiff, finely tuned frame designed for high performance FPV Drone Racing. 
Brand: Realacc 
Item name: X210 FPV Racing Frame 
Wheelbase: 214mm
Material: carbon fiber
3mm frame arm version: 72g (frame hardware), 77g (with battery protector plate)
4mm frame arm version: 88g (frame hardware), 93g (with battery protector plate)
Full 3K Carbon Fiber frame.
Optional 3mm or 4mm frame arms.
Dual purpose FPV and HD camera mounting solution.
Compact size for 5" propellers, 214mm motor to motor.
Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
"Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
Included power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics.  
LiPo battery protection plate included.
Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
Lightweight and rigid
Note: camera not included

Recommended Parts (not included):


Brushless Motors 1806~2204(KV2000~2300):


Flight controller:

Camera and transmitter:

FPV Monitor & video goggles:


Package included:
1 x Realacc X210 carbon fiber frame kit
1 x Matek PDB-XT60 5V & 12V


Customer Reviews

  • PixelJedi
  • 1/19/18 12:09 PM
This is for my first FPV Drone build. My intent is to get into freestyle and also have some fun with video (I am a photographer). Out of all the frames I looked at, this one seemed to align with features I wanted. I haven't put it together yet as I am still waiting on more components, however so far I am satisfied with the quality and construction. I am excited to get it put together and will probably add more to my review later.
  • Spangler
  • 10/16/17 6:00 PM
The X210 went together nicely, and looks great! Be sure to use the longer screws for connecting the lower and upper halves. They included extra screws which may be for the motors. I haven't tested the PDB yet, but it came in a static-free bag.
  • mascrum
  • 8/6/17 11:24 PM
It is so quick and agile! This is the best frame I've ever flown. It just whips around turns so easily. I definitely prefer an undermount battery frame design.
  • fretman
  • 9/15/16 12:02 AM
Build went together easy enough. Nice design(or nice copy), and all components fit nicely in a tidy package. couple not so great areas - the camera position is bad and it doesn't create much friction to hold the camera firmly in place. using a hs1177. also if mounted in stock location, you can't get a strap in there for a HD cam. I ended up drilling a new hole bit lower and forward. - the vtx/antenna mount put the antenna way too close to the rear props. Will have to see how often my video antenna gets chewed up by the props.
  • James
  • 6/22/17 9:44 AM
I found this frame very easy to assemble, very stiff (I purchased the thick version). Nice overall quality. I would buy again. PDB board worked great. NOTE: Camera isn't super well protected in this design. I will be adding some 3D printed guards around my camera in future.
  • mnementh
  • 8/12/16 11:27 AM
The RealAcc X-210 is better known as the Banggood "Charpu-X Clone"; there is no doubt that this is an out & out clone. However, quality appears better than average, and they do include a decent name-brand integrated PDB with 5V/2A switching regulator & 12V/500mA 7812 linear regulator. ESC outputs are rated 25A continuous; figure 30-35A surge current. Frame plates measure out as promised; decent quality CF plate with lots of fine layers indicating no filler. Cut edges are a bit rough with a few slubs, but nothing a few minutes with sandpaper won't cure easily. Advertised weights are quite optimistic; complete kit (everything in the package) weighs in at 110.22 grams. Vital Statisitcs: 4mm Main Plate 2mm Upper Body Plate 1.5mm all camera mount parts and battery armor plate m3 x 30mm Standoffs Weights: Main Plate: 63.77gr All Carbon Fiber Parts: 80.92gr All Hardware: 15.26gr Frame & Hardware: 90.82gr Matek XT60 PDB: 10.09gr Battery Strap & Armor Plate: 10.12gr Full Kit: 110.22gr Bottom line is it's a decent frame particularly at the price point, and I don't regret buying it a bit; I'll certainly get my money's worth of fun out of it. Those of you interested in the Matek XT60 PDB can find it here:
  • DerekD
  • 1/1/18 7:08 PM
I've bought 3 of these frames in the past 9 months and really love them. They are so sturdy yet light that even the finished quad isn't heavy enough to cause any significant damage to itself (I'm just over 300g dry weight). I did manage to break 2 of them but both were the result of hardware failures and particularly nasty crashes. But the other 5000 cartwheel crashes across my backyard or through my trees didn't even phase this frame. You could definitely use one for racing. Not the lightest racer but definitely usable. But they're also great for an intermediate pilot trying to up their freestyle game. So long as you're flying over grass, you can crash these a million times without having to worry about much damage. And they're heavy yet nimble enough to get good smooth freestyle footage. Get good on this one then build your Martian II or Stingy-clone. Or get fast on this frame then build your Chameleon or Merica. For the intermediate FPV everyman you just can't get a better value than this frame.
  • oscar
  • 6/11/17 11:08 AM
I bought the 4mm. This frame is a tank! Wish i would have got the 3mm.
  • rblos1123
  • 1/11/17 3:49 AM
Great frame but Americans that have a problem with orders from the China warehouse will receive the worst customer service available. If you have any problem with your order whats so ever, don't expect anything positive, you wont ever get your money back, they won't offer to have item shipped back , they won't offer to ship out another item or in my case shipping the wrong product. You will receive extremely slow responding broken english unprofessional emails which basically give you the run around not solving any issues at all.
  • engineerx
  • 8/28/16 2:20 AM
Frame CF material appears to be good quality. Milling finish is good. No rough edges. Minor fitment work needed but any rookie can manage. Get some M3x8mm hex screws for the 4mm frame as the ones included are too short. Price is really a bargain. Hopefully arms don't break easily.
  • Jcave14
  • 8/12/17 8:30 PM
Had to sand the edges. Otherwise this is a great value and very durable!
  • djcn123
  • 8/14/16 7:08 PM
El diseño excelente, el precio ni hablar, se ve de muy buena calidad por supuesto que comprare otro, todo encajó bien lo único para mi fueron los tornillos muy pequeños pero tenía más grande así que no fue problema, realmente lo recomiendo.
  • william
  • 10/12/17 8:13 PM
So strong! So powerful! I show this to my friends and they say, "Wow! There's no way that thing's ever going to break!" Everything fits just right, the PDB is great, though you should get some wires to attach the XT60 to the pdb, as a direct attachment is not secure. Such a cool frame. My friends can't even compare their basic 250's to it. And the FPV camera mount is sweet! Also the included battery strap under the drone really manages the CG well. GET THIS!!!!
  • JohnnieRico
  • 9/23/16 3:12 PM
If you're gonna clone a frame, may as well do some of the best.
  • N3tT3chMan
  • 8/16/16 10:11 AM
Pros - The Value and appearance are great. For the price you cant beat it. It comes with a very nice PCB and the XT60 connector and very nice knurled standoffs. Its an identical clone to a much more expensive one. Cons - The fit and finish of the carbon is good but the cuts are off just a hair for the PCB holes. Also the peices that make up the camera mount do not fit right without trimming/sanding some of the carbon off. I had to remove some carbon to make the frame go together right. Because of this I gave the quality a 4 out of 5 stars. Overall I will recommend this product to friends.
  • Baagomez
  • 7/11/17 2:17 PM
good frame
  • dronero
  • 6/27/17 12:40 PM
Totalmente compatible con el lumenier original
  • Hailenp
  • 12/1/16 7:49 AM
Muy bueno por ser unibody eso evita vibraciones, ademas el espesor hace que sea bien difícil de romper
  • dronero
  • 6/27/17 12:37 PM
Excelente frame, muyy resistente
  • djcn123
  • 8/15/17 12:57 AM
Un excelente frame a muy bajo costo es muy resistente y de buena calidad