RUSH MINI TANK STACK RUSH CORE F7 & MATRIX 32bit 30A ESC & MINI VTX 25-800MW For FPV Racing Drone 20*20mm

$123.40 $487.75
DESCRIPTION


Specification:
Brand name: RUSHFPV
Item name:  RUSH CORE 7 Flight Controller & RUSH MATRIX 30A BLHELI32 4IN1 ESC & Tank Mini VTX
 
RUSH CORE 7 Flight Controller
Firmware: RUSHCORE7 (BETAFLIGHT)
FC Programming: Supported
Programming via: Betaflight configurator or Others
Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300/600/1200, Proshot1000 and etc.
Compatible with (Trabsmitter): PPM, Spektrum1024/2048, SBUS, SYMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc.
OSD: Built-in ,NTSC/PAL Supported
MCU: STM32F722RET6 @216MHz
BLACKBOX: Built-in ,16MB
Voltage Monitoring: Supported
Current Monitoring:  Supported
External Buzzer: Supported
LED Control: Supported
BEC: 5V@2A
USB Port: MicroUSB
Size: 28x29mm
Weight: 5.6g
Appliications: 110-260mm FPV Drone
 
RUSH MATRIX 30A BLHELI32 4IN1 ESC 
Cont. Current: 30A
Peak Current: 40A
BEC: N/A
LiPo Cells: 3-5S (Recommend)
Firmware: RUSH_MATRIX_30A  Firmware
Weight: 6.5g
Size: 32x31.5x5.4mm
Mounting Hole: 20x20mm

Rush Tank Mini VTX
Input Voltage: 7-36V DC
Output Voltage: 5V 1A 
12V Input Current: 40mA@Pitmode, 95mA@25mW, 185mA@200mW, 250mA@500mW, 380mA@800mW
Channels: 48CH RaceBand / LowRace
Power: PIT/25/200/500/800 mW
Installation Hole: 20*20mm
Dimensions: 28*28*3.3 mm
Weight: 4.46g(without dust cover), 5.4g(with dust cover)

Features:
Compact size,super power.
Available with external mic.

English Manual,  
 
Package Included:
1 x RUSH CORE 7 Flight Controller
1 x RUSH MATRIX 30A Blheli_32 4 in 1 Brushless ESC  
1 x Rush Tank Mini VTX
4 x M2 Nut
4 x M2 x25mm Screw
5 x Short Lsolation column
5 x Long Lsolation column
2 x SH1.0  3Pin Lock connection cable (60mm For receiver and LED strip)
2 x SH1.0  4Pin Lock connection cable (30mm/65mm For camera)
1 x MT30 Power plug (with cable)

REVIEW

Customer Reviews

  • DB52
  • 11/28/19 7:59 AM
Absolutely one awesome stack, had to copy schematic from Banggood, also watched some YouTube to wire up and install. Plug in for receiver is lacking the tx wire, but you can solder to the tx pad on underside of flight controller if you’re using crossfire nano.
  • David
  • 12/19/19 7:11 AM
Very good small stack

YOU MAY LIKE